SCION XB 2008 - SUBWOOFER ENCLOSURE
Procedure
9. Complete the Reassembly of the Vehicle:
(a) Reinstall the back seat
(1) Reinstall the bolts loosely, then tighten them.
(2) Tighten 12mm bolts to 30 N-m (22 lb-ft)
(3) Tighten 14mm bolts to 40 N-m (30 lb-ft)
(4) Reconnect any disconnected connectors.
(b) Reinstall glove box.
(c) Reinstall upper console panel.
(1) Reconnect any disconnected connectors.
(d) Reinstall lower console panel.
(1) Reconnect the lighter connector and clip.
(e) Reinstall doorsill.
(f) Reconnect the vehicle’s negative battery cable.
(Fig. 13-3)
(1) Position the Negative Battery Cable at the
original factory position.
(2) Tighten the nut with 4.1 N-m (36 lbf-in) of
torque.
(3) Be careful not to touch the positive battery
terminal.
(g) Clean up and remove any trash.
Kommentare zu diesen Handbüchern