2008 SCION xB O.E. INTAKE REMOVAL
Procedure
Issue A: 04/28/08 Page 11 of 48
(f) Squeeze and lock the spring clamp located at the
throttle body. This will release the clamping
pressure on the hose. Release the spring clamp
for the crankcase breather tube and disconnect
the hose. (Fig. 5-4). Unclip the vacuum hose
f
rom the air inlet tube.
(g) Remove the Vacuum Switched Valve (VSV)
bracket from the slot in the air inlet tube by
pulling straight up. (Fig. 5-5, Large Arrow)
(h) Remove the air inlet tube.
(i) Remove the three (3) mounting bolts from the
air cleaner bottom. (Fig. 5-6)(10mm)
(
j) Remove the harness clip from the air cleaner
bottom and set aside. (Fig. 5-6)
(k) Remove the air cleaner bottom.
Flathead
Screwdriver
Fig.5-6
Fig.5-4
Fig. 5-5
Kommentare zu diesen Handbüchern