Scion 2008 xB Installationshandbuch PDF herunterladen (Seite 12)

2008 SCION xB O.E. INTAKE REMOVAL

Procedure

Issue A: 04/28/08 Page 12 of 48

(l) Remove the push-in clip. (Fig. 5-7)

(m) Remove the bolt from the mounting tab of the

lower inlet duct. (Fig. 5-8)

(

n) Remove the air inlet duct from below.

(o) Unclip the two locks that hold the wire harness

protector to the battery tray. Remove battery

tray (4 bolts, 12mm) save this hardware to be

reinstalled later. Remove negative battery cable

from body. Save the battery cable and bolt as

these will be re-used later. Remove the bolt

holding the body ground strap. The bolt will be

re-used after the battery tray is installed. (Fig. 5-

)

10 mm Socket & 10”

long extension

Flathead

Screwdriver

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Keine Kommentare

Scion 2008 xB Installationshandbuch Seite 12